Monday, December 19, 2011

Pain at the Pump: Policies that Suppress Domestic Production of Oil and Gas

Pain at the Pump: Policies that Suppress Domestic Production of Oil and Gas - House Oversight Committee - 2011-05-24 - House Committee on Oversight and Government Reform. Witnesses: The Honorable Lisa Jackson, Administrator, US Environmental Protection Agency; The Honorable David Hayes, Deputy Secretary, Department of Interior. Video provided by US House of Representatives.

Kidde Fire Alarms On Sale

Saturday, December 3, 2011

Radon Testing - How to Test and Remove Dangerous Radon Gas

!±8± Radon Testing - How to Test and Remove Dangerous Radon Gas

Radon gas dangers in the home have become more prevalent, and can affect homeowners before radon is detected. Consider the story of Stanley, a nuclear power company employee from Pennsylvania. One day he arrived at work and the radiation monitors at the plant screamed an alarm. The experts were puzzled--how could Stan set off an alarm on his way in to work? The answer to this question brought to light one of the biggest environmental concerns of our time: Radon. It turns out Stan's house had radon gas levels more than 500 times what was considered safe and Stan had carried the effects into work. Stan desperately needed a radon mitigation system to save himself and the health of his family.

What is Radon?

Radon is not an industrial chemical or synthetic creation. It occurs naturally when uranium in the soil breaks down, as do all organic compounds. If inhaled, radon can cause damage to lung tissues and can lead to lung cancer.

Although radon has been around since the dawn of time, it's become a problem in the last 20 years or so, since the energy crisis led to the construction tighter more energy efficient homes. Years ago, when energy was cheap, homes were much draftier, and these built-in air leaks helped dilute indoor contaminants like radon to safe levels. However, as energy costs rose and home construction became tighter, indoor radon levels have also risen. Today, we need to pay close attention to our indoor air environment to make sure the air stays healthy and free of radon dangers.

Testing for radon gas is fairly simple. Within your own home, you can even do the test yourself. Many radon laboratories sell simple test kits, which usually come complete with a mailer to send the kit back to the company for analysis. However, if the house you're testing is one you're buying, some state laws require the test be done by a licensed radon testing company. Likewise, if your radon test reveals a high level of radon gas, a radon mitigation systems will be needed and should also be installed by an experience, licensed radon mitigation professional.

How to do a Radon Test

All radon tests must be done in the basement or lowest livable level of the house and under closed building conditions. Except for normal entry and exit, this means all windows and doors, from the basement to the uppermost level of the house, must be closed for the entire test, which can be up to a week. While this may be difficult, especially in the summer, it is critical. If the windows are left open, a false high or low reading of radon dangers may result.

The most common types of radon gas tests are:

Charcoal Absorption Canister: This is the most common radon test available and usually the least expensive. The test consists of a charcoal-filled canister which is left in the home for a period of two to seven days. Then the test is sealed and sent to a laboratory for analysis. The lab will usually mail the result back to you within one week. This test method is relatively inexpensive and reliable if done properly. However, it can take up to three weeks from the start of the test until the result is received. E-PERM Testing: E-PERM is short for Electret-Passive Environmental Radon Monitor. The way it works, however, is not as complicated as its name. As radon is formed, it gives off "ions" which produce a small electrical charge. The E-PERM is designed to measure the amount of electrical charge and convert this measurement into a radon level. Similar to charcoal canisters, this test for radon danger is usually done for two to seven days, but processing is much quicker as the testing company can usually produce a result within a day of the test completion. Continuous Monitors: These devices are among the more expensive radon tests available but have several distinct advantages. Continuous monitors sample air over a minimum two-day period and can produce hourly radon readings. In addition to the test result being immediately available upon test completion, the hour-by-hour test result can be analyzed to check for unusual air patterns in the house. This test is often chosen by people buying a house to make sure the closed building condition requirement is met by the sellers.

Most importantly, if the radon test result comes in high, don't panic. Most buildings can be modified to reduce radon gas to safe levels by installing a simple radon mitigation system. In newer buildings, partial radon mitigation systems are even required during construction, just in case they are needed later to reduce or eliminate radon dangers.


Radon Testing - How to Test and Remove Dangerous Radon Gas

Order Electric Toothbrush Comparison Kawai Digital Pianos Quickly Low Cost Above Toilet Space Saver

Thursday, November 17, 2011

Radon Found In Countertops

Popular granite countertops may emit radon at dangerous levels. Harry Smith discusses ways to test countertops with an expert in radiation testing.

Hoover Floormate Right Now Reviews On Dyson Vacuums Save

Thursday, November 10, 2011

Nashville Home Inspection Reveals Improperly Installed Gas Water Heater Vent Pipe.wmv

ultrasoundinspections.com Nashville Home Inspection discovers Vent pipes that are installed for gas appliances should have a upward slope to allow for the proper draw/ventilation to safely exit the dangerous CO2 gas from the structure. Failure to do this could be fatal. Ifyou are in need of good detailed home inspection in the Middle Tennessee area or have questions about the home inspection process, please contact Ultra Sound Home Inspections. We have been protecting buyers like you in the Middle Tennessee area since 2004 and will help you avoid buying the "money pit". We will take the necessary time needed to explain each issue found so you will have a better understanding of any possible expenses that may be involved in correcting your new home. Within a few hours of the inspection you will be provided a comprehensive computer generated report from our 600 item home inspection check list with digital photos that clearly addresses all of the issues we discussed and that were found. Don't wait, visit our website today and schedule online or give us a call. We'll give you the peace of mind you deserve. Ultra Sound Home Inspections 615-476-1967 ultrasoundinspections.com

Partlow Controllers Decide Now


Twitter Facebook Flickr RSS



Français Deutsch Italiano Português
Español 日本語 한국의 中国简体。







Sponsor Links